Weka High Freq Hand Saw TS40 (3.7kW@230V / 6.5kW@400V)
Requires Weka High-Freq Converter FU6U 230/400V(MHHX-WEK-FU6U) Powerful electric hand saw for the multi-purpose use in stone, asphalt, concrete and masonry. Diamond saw blade capacity of 400mm diameter, / 165mm cutting depth High frequency drive: Nominal power at 230 Volt is maximum 3700W and at 400 Volt 3 AC max 6500W. Water-cooled motor with the cooling principle patented by WEKA. The cooling circuit is hereby completely separated from the electrical part of the motor. If seals would fail, the cooling water does not enter the inner of the motor, but only leaks to the outside. Motor control: Controlled by a very efficient converter, the FU 6, which is located in a small and stable aluminum box. It supplies the required energy, controls current input and speed. The integrated (Powerfactor Correction) ensures that a none-current is not drawn from the mains, but only energy that is converted into mechanical power. Converter recognizes if connected to 230V or 400V and adapts current and power accordingly. Motor current is controlled according to the requirements and limited to the maximum, thus machine cannot be overloaded. The temperature of motor is checked constantly. If loaded too high or cooled too little, power electronic switches off before anything can happen. Handling and operation: Via converter connected to the 400V mains. For use at 230V mains, adapter cable is used. By the adjustable handle and the variable position of blade guard, machine can be adapted to every sawing job optimal. Integrated safety switch prevents an unintended start of the motor as far as possible. Machine is water cooled, but if operated dry, a bypass outlet can be utilized. Blade change is easy without guard removal. Blade cooling via saw spindle. The ball control valve is attached under the switch handle in the way that it can be easily operated with the forefinger without letting the saw loose. Stability and weight: Aluminum housing and total weight only 9.4kg. Corrosion and water protection: Case and blade guard are made from aluminum, all main parts are rustproof. Converter is not only very powerful and robust, but also splash water proof according protection class IP 55 referring to EN60 529, i.e. on proper use no water can enter into internal. Oil bath lubrication: Like all gears of the WEKA family - is fitted with an oil bath lubrication and thus efficient, low in maintenance and long-living. Life time: The operation hours counter which is integrated in a micro controller allows for 300 hours of work. Once reached, operator will be alerted to arrange service by starting only when start button is pushed three times.
|Add Info||Blade Ø / cut depth: 416mm/170mm|
|Application||Wet & Dry|
|L x W x H||0.000000 x 0.000000 x 0.000000mm|
If you have questions, please fill in the following fields
Customers Also Purchased
Took 0 milliseconds