Loading the content... Loading depends on your connection speed!

WEKA drill motor | DK1603 | 230V | 10A | 2000W - MDM-WEK-DK16

WEKA drill motor | DK1603 | 230V | 10A | 2000W

Code: MDM-WEK-DK16
Barcode: 9420050725554
Intellitronic - the new electronic system starts the motor by means of a micro controller softly and thus avoids a too high start current. When exceeding the over current threshold the electronic is showing this by a pulsating of the motor. If the operator now decreases the feed power, the motor works normal again. If the operator does not decrease the feed power the electronic switches the motor off after some seconds. After this action the motor can be started immediately. It is not required to wait a time period before starting again like on a thermal motor overload switch. Thus the Intellitronic avoids overload conditions and increases safety, the operators comfort and the motors life time.


Add InfoSpeed: 900/1900/3900rpm | Core bit range: 20mm-160mm
ApplicationWet Only
L x W x H540.000000 x 210.000000 x 420.000000mm

Downloads (1)

LinkIdurl Description SizeTypeModified
94722/==0dw6w4KV+jXvv8MMMfaK0Q==/ User Manual.pdf
User Manual
837.9KbpdfOctober 10, 2019


If you have questions, please fill in the following fields

To contact us via email, please complete the fields below

First Name
Last Name
Email Address
Company Number
Took 0 milliseconds