EARLY ENTRY | blades & skid plates
Loading
Early Entry Saw Blades:
- Our Early Entry blades are available for different curing stages:
- EE-UH★★★ PURPLE: very soft bond | curing stage: ultra hard
- EE-HM★★★ GREEN: soft bond | curing stage hard - medium
- EE-MS★★★ RED: medium bond | curing stage medium - soft
- EE-SA★★★ YELLOW: hard bond | curing stage soft - abrasive
- Multi-fit bore - fits a variety of machine bore sizes including Husqvarna Soff-Cut
- Insert spacers available to suit standard floor saw bore 25.4 mm
Skid Plates:
- Stainless steel construction
- 3.3 mm thick bottom plate allows skid to be used for an average of 3 blades before requiring replacement, depending on the abrasive properties of the aggregate and the diametre of the blade
- Steel mounting pins that will not break or fail unlike cast aluminium mounts
- Mounted with a locking pin to keep the plate in place
- Used when making cross-cuts in green concrete and to prevent corners and cross cuts from chipping
- Simply insert the joint protectors into the cut prior the next cross cut
Variants
| Item no. | Availability | Price excl. GST | Quantity |
|---|
No products found.
Loading
EARLY ENTRY | blades & skid plates
Early Entry Saw Blades:
- Our Early Entry blades are available for different curing stages:
- EE-UH★★★ PURPLE: very soft bond | curing stage: ultra hard
- EE-HM★★★ GREEN: soft bond | curing stage hard - medium
- EE-MS★★★ RED: medium bond | curing stage medium - soft
- EE-SA★★★ YELLOW: hard bond | curing stage soft - abrasive
- Multi-fit bore - fits a variety of machine bore sizes including Husqvarna Soff-Cut
- Insert spacers available to suit standard floor saw bore 25.4 mm
Skid Plates:
- Stainless steel construction
- 3.3 mm thick bottom plate allows skid to be used for an average of 3 blades before requiring replacement, depending on the abrasive properties of the aggregate and the diametre of the blade
- Steel mounting pins that will not break or fail unlike cast aluminium mounts
- Mounted with a locking pin to keep the plate in place
- Used when making cross-cuts in green concrete and to prevent corners and cross cuts from chipping
- Simply insert the joint protectors into the cut prior the next cross cut
Variants
| Item no. | Availability | Price excl. GST | Quantity |
|---|
No products found.